How to maintain a wooden storage box
May 27,2022
The walnut oil used to maintain wooden storage boxes is only suitable for wooden storage boxes that are not painted and waxed. The frequency of use should not be too high. Generally, it can be used once every 2-3 months. In a relatively dry environment, The maintenance interval can be appropriately shortened, and it is enough to maintain it once a month or so, but you must pay attention to the dosage during normal use.
For the panel of the wooden storage box, in order to protect the paint film from being scratched and showing the wood grain, a thick glass plate is usually placed on the desktop, and a small suction pad is used to separate the glass plate from the wooden desktop. It is recommended not to Use clear crystal pieces.
Generally, the wooden storage box is used for a long time, and the surface coating of the wooden storage box needs to be protected at ordinary times. It is recommended to wipe it with a little wax every three months, which not only increases the beauty of the wooden storage box, but also protects the wood.
Prevent alcohol, banana water and other solvents from overturning, otherwise scars will be left on the surface of the wooden storage box. When the surface of the wooden storage box is stained with dirt, it should be washed with mild soapy water, dried and then waxed to restore the original appearance. However, it is forbidden to wipe with solvent liquids such as gasoline, kerosene, turpentine, etc., otherwise the coating on the surface and the luster of the paint will be wiped off.
The wooden storage box should be concealed well. The items stored in the cabinet should not exceed the door frame. If it is often stuck, the cabinet door will be deformed. The mahogany surface of the wooden storage box is generally brittle, such as the desktop and chair surface. Always pay attention to prevent bumps and cracks. , if a tenon is found in use or moved, re-glued and seal before use.
In order to keep the wooden storage box neat and tidy, you can wipe the dust with clean gauze every day. Chemical brighteners should not be used to avoid sticky and damaged paint film. In order to keep the paint film of the wooden storage box bright, walnuts can be crushed Peel the skin and degrease with three layers of gauze.
Disinfection and sterilization of toys must be paid attention to
May 24,2022
Babies aged 2-3 always like to chew on toys, and disinfection and sterilization must be paid attention to!
Children aged 0-3 do not have enough motivation, and the way they know the world is usually "eat" - almost everything in the room has been sucked by them, but the most frequently flipped brand is Their favorite toy!
Toys were originally the only companions for children's happy childhood, but correspondingly, they are also more likely to bring germs into the body, increasing the risk of infection.
It is not difficult for careful parents to think that when the baby is sucking the toy, the bacteria on the toy will directly enter the baby's mouth. Although these bacteria are harmless to the baby's body in the short term, when the bacteria continue to multiply and the number and concentration of bacteria and viruses per unit area or unit volume accumulate to a certain extent, it will undoubtedly pose a threat to the children's health.
If the toy is unsanitary, the baby can easily get sick from bacteria and viruses.
Not afraid to scare you, Baba Mama said that the test data of bacteriologists showed that after giving the sterilized toys to the baby for 10 days, the number of bacterial colonies on plastic toys was nearly 3,000, and the number of wooden toys was nearly 5,000. There are more than 20,000 plush toys, which is a terrible number.
Dr. Karen Sokal-Gutierrez, a professor at the University of California, Berkeley School of Public Health, suggested that parents should thoroughly clean and sterilize all of their baby's toys once a month, especially plastic toys for 2-3-year-old babies who have the strongest oral desire. Disinfection and sterilization once a week, UV sterilization is recommended before entry.
So how to clean and sterilize baby's toys? Toys of different materials require different cleaning and disinfection methods.
plastic toys
Almost every baby will have a plastic toy similar to a little yellow duck. This kind of plastic toy is brightly colored and is the most favorite kind of toy for babies to put in their mouths. When cleaning plastic toys, it is recommended to use a clean brush, dip in baby bottle cleaner, clean the surface of the toy, pay attention to the dead corners and crevices of the toy to brush several times. Then rinse the toy with plenty of warm water to remove stains and foam, and dry in the sun.
wooden toys
Toys such as building blocks and toy Trojan horses are not easy to clean because they are made of natural wood. Never immerse them in water, as this may deform the toy, become moldy after absorbing water, and endanger the baby's health
The correct approach should be to wipe with clean non-woven fabric dipped in soapy water, rinse with fast flowing water, dry, and then disinfect and sterilize with an ultraviolet sterilizer.
plush toy
Toys such as plush and weaving look cute and cute, but they have the most hidden bacteria.
Cleaning plush toys is usually divided into two steps: first, add children's professional laundry detergent, wash the plush toys, and then expose them to the sun, take them back, and then use an ultraviolet sterilizer for secondary disinfection and sterilization.
How to polish uneven wood ornaments with sandpaper
May 20,2022
1. Usually, you need to draw the creative draft first, and then use the ink line to outline and enlarge it on the wood;
2. The rough blank is the foundation of the entire work. It summarizes the entire conception of the shape with concise geometric shapes. It is required to be layered, dynamic, proportional, and stable in the center of gravity. ; Chisel rough billets: from bottom to bottom, from front to back, from the surface to the inside, from shallow to deep, advancing layer by layer. When chiseling rough blanks, you should also pay attention to leaving room, just like cutting clothes, you should relax appropriately. The folk jargon says it well: "If you keep it big, you can change it to small, but it is difficult to restore fat if you are worried about barrenness. The inner distance should be small and not large. Remember that carving is subtraction." , and then gradually implement and shape the specific shape, leaving room for polishing. At this stage, the volume and lines of the work have become clear, so the knife skills are required to be fluent and smooth, with sufficient expressiveness;
3. Light repair: use fine carving and thin knife method to repair the knife marks in the fine blanks, so that the surface of the work is delicate and perfect. The knife traces are required to be clear and detailed, or smooth, straight, or rough, and strive to accurately express the intention of the work;
4. Grinding: According to the needs of the work, rub the wood carving with woodworking sandpaper of different thickness. It is required to use coarse sandpaper first, then fine sandpaper. It should be polished along the direction of the wood fibers until the desired effect;
5. Coloring and polishing: Use a stiff brush, a small stiff brush, and a coloring cylinder. Colored pigments generally refer to water-soluble, such as gouache, watercolor or leather shoe polish. They are characterized by small coverage and strong permeability. Acrylic paint for oil painting should not be used.
How to maintain and clean wooden toys
May 07,2022
Buy wooden toys and plastic toys, remember to clean them and wipe them quietly. It is best to disinfect them. Wooden toys are easy to turn black and mildew in a humid environment. When cleaning wooden toys, first use a clean Use a wet towel, gauze or handkerchief dipped in the bottle cleaning solution to wipe the surface of the wooden toy, then rinse with water, and finally wipe the water droplets on the surface of the wooden toy with a clean gauze or handkerchief.
When drying wooden toys, turn it over to prevent some of them from being exposed to the sun. Plastic toys are easier to clean, but when washing, you need to remove the parts inside, but you must ensure that they can be installed in the end. Look at the instructions. Come. The wood materials used by some inferior manufacturers (this is not something that ordinary people can identify) are highly absorbent and prone to moths, so it is best to keep them in the sun.
How to sterilize wooden toys
Apr 28,2022
Toys are your baby's closest friend. Toys are often placed on the ground when babies play, and toys are likely to become "dens" for bacteria, viruses and parasites. Bacteriologists have determined that after sterilized toys are played with babies for 10 days, the number of bacterial colonies on plastic toys can reach 3163, on wooden toys 4934, and on fur toys as many as 21500. What a terrible number! It can be seen how important it is to clean and disinfect baby toys, and the method of disinfection should be determined according to the material of the toy. 1. Toys made of fur and cotton cloth: they can be placed in the sun for a few hours. 2. Wooden toys: can be washed with boiling soapy water. 3. Toys made of metal: you can scrub them with soapy water first, and then put them in the sun. 4. Plastic and rubber toys: can be soaked in 0.2% peracetic acid or 0.5% disinfectant for 1 hour, then rinsed with water and dried in the sun. Usually, it is necessary to cultivate the good habit of putting the toys away after the baby is finished playing. Parents should pay special attention not to let the baby put the toys in their mouths, and wash their hands after finishing. Mouth blowing toys are best played alone to prevent cross-infection of infectious diseases. I wish the baby grow up happily!
How to disinfect moldy wooden toys
浙ICP备18037221号-1
Wholesale Wooden Crafts Manufacturers
русский
Deutsch
日本語
中文简体
